OVER SPEED
GOVERNOR TYPE R6R WITH CONTACT.
Pulley o 300. Small size base. Certified TUV. To law TRA and EEC
EN 81. Nominal speed up to 1,82 m/sec. Tripping speed up to 2,10 m/sec. |
|
TENDION WEIGHTS FOR
OVERSPEED GOVERNORS
Tendion weights R4 o 200 - o 260 and o
300. Available with or without contact included cast iron counterweight to combine with
corresponding overspeed governors. To law TRA and EEC EN 81. |
|
INSTANTANEOUS SAFETY GEAR
BLOCKS
Type C1 for lifts and type C2 for goods-lifts. Also available types: SP 50 - SP 50/B
- SP/60 for guide from 6 to 16 mm, certified TUV, to law TRA and EEC EN 81. |
|
ROPE ANCHORAGES 12 MA - 16
MA - 20 MA.
Available of various lengths for ropes from 6 to 15 mm. With or without
spring. Available with eyebolts only. |
|
GUIDE SHOES
For maximal leads from kg. 1000 up to kg. 7000. With Perlon guarniture for guide
from 6 to 16 mm. Available, also, with brass guarniture for guide of 16 mm. and
over. |
|
DIRECTOR PULLEYS STANDARD.
Assembled with ball bearings or bush. Available with fixed or dismountable shaft for
keeper plates or with supports. |
| Diameter: |
from |
320 mm |
to |
750 mm |
| Ropes number: |
from |
4 |
to |
8 |
| Ropes diam.: |
from |
8 mm |
to |
13 mm |
| Static load: |
from |
1700 kg. |
to |
6300 kg. |
LITTLE PULLEYS FOR
FOOD-LIFT.
Type with diameter 250 mm - 2 ropes - with bush and shaft for keeper plates or with
supports. Type with diameter 300 mm - 3 or 4 ropes - with ball bearings and shaft
for keeper plates or with supports. |
|
| Diameter: |
from |
500 mm |
to |
650 mm |
| Ropes number: |
from |
4 |
to |
8 |
| Ropes diam.: |
from |
12 mm |
to |
16 mm |
| Static load: |
from |
2300 kg. |
to |
10,000 kg. |
|
DIVERTOR PULLEYS FOR HIGH
STATIC LOAD.
Assembled with ball bearings or roller bearings, available with fixed or dismountable
shaft for keeper plates or with supports. |
| Diameter: |
from |
400 mm |
to |
600 mm |
| Ropes number: |
from |
2 |
to |
4 |
| Ropes diam.: |
from |
10 mm |
to |
11 mm |
| Static load: |
from |
1400 kg. |
to |
4200 kg. |
TRACTION PULLEYS.
Hub with housing for spline. Diameter of the hole is to customer's request as
different utilizations. Also available with taper hole. |
N.B.:
We also produce traction pulleys with interchangeable hub (Flanged type). |
|
