Product description

RL-Ramloc: By clamping the ram, during the loading of the car, sinking of the car due to compressibility of the oil is reduced.

R10-Rupture Valve: Decelerates the elevator in case the down speed exceeds allowable limits. Alternatives connections available.

BV-Ball Valve: To close pressure lines.
Connections: 1 1/2", 2" and 2 1/2" G or NPT.

L10-Pressure Lock Valve: Is a pilot operated check valve which prevents down movement of the elevator should an electrical or mechanical malfunction occur in the main valve (required in Australia).

HX-Manual Down Valve: Can be used for emergency manual lowering or in combination with the EV down valve to test the rupture valve.

MX-Solenoid Down Valve: For revision or inspection travel of the elevator or as an extra slow speed down valve.

EV-Control Valve: A selection of valves with flows ranging from 10-1600 l/min (2.6-416 gpm), from regular to highest comfort performance.

KV-Control Valve: For small hydraulic elevators with speeds ranging from 0,16 m/s to 0,8 m/s (32-160 fpm), depending on the valve type.

H11; H12-Hand Pump: For application with hydraulic lifting or pressing equipment and for the pressure testing of hydraulic systems in general.

FD-Fine Leveling Drive: A small motor, pump and valve block provide immediate re- levelling and accurate floor stops.